[Clam-devel] Re: Turnaround

[Han, Yushen]

David,

Also, I don't have any result by "locate 'Qt*.pc'".
Is that related?

Best regards,
Han, Yushen


On Thu, Aug 7, 2008 at 3:56 PM, Han, Yushen <yushen.han at gmail.com> wrote:
> Hi, David and Pawel
>
> I have the "no attribute 'AddMethod' " problem when I am compiling NE.
> All the .py files listed below did exist in the right dir. But I don't
> understand
> "AttributeError: SConsEnvironment instance has no attribute 'AddMethod':"
>
> Pawel, did you say that the problem was gone after you " had to update
> scons 0.97 to 0.98.5 "?
>
> I am still using 0.97 and am going to update it first...
>
> Best regards,
> Han, Yushen
>
> 156-56-219-141:NetworkEditor yushen$ sudo scons install
> prefix=/usr/local clam_prefix=/usr/local QTDIR=/opt/local
> scons: Reading SConscript files ...
>
> scons: warning: QTDIR variable is not defined, using moc executable as
> a hint (QTDIR=/opt/local)
> File "/usr/local/share/clam/sconstools/qt4.py", line 208, in _detect
> AttributeError: SConsEnvironment instance has no attribute 'AddMethod':
>  File "/Users/yushen/CLAM/clam/NetworkEditor/SConstruct", line 44:
>    env.Tool('qt4', toolpath=[clam_sconstoolspath])
>  File "/opt/local/lib/scons-0.97/SCons/Environment.py", line 1340:
>    tool(self)
>  File "/opt/local/lib/scons-0.97/SCons/Tool/__init__.py", line 157:
>    apply(self.generate, ( env, ) + args, kw)
>  File "/usr/local/share/clam/sconstools/qt4.py", line 390:
>    env.AddMethod(enable_modules, "EnableQt4Modules")
>
>
> On Tue, Aug 5, 2008 at 8:23 AM, Pawel Bartkiewicz <tuuresairon at gmail.com> wrote:
>> Ok, it took me some time to understand, but here's a patch. I'm not
>> committing it, because it's not complete yet. It replaces the realtime
>> analysis with a VectorView displaying the time code. I had to change
>> AudioFileMemoryLoader a bit.
>>
>> BTW, I had to update scons 0.97 to 0.98.5 (masked as unstable in
>> Gentoo) because one of the recent commits added the following error in
>> sconstools/qt4.py when building Turnaround:
>> "SConsEnvironment instance has no attribute 'AddMethod'"
>>
>>
>> On 02/08/2008, David García Garzón <dgarcia at iua.upf.edu> wrote:
>>> Pawel, I did some changes on the PoolDataArraysource in order to easy your
>>> task, so update your repository before going on.
>>>
>>> El Saturday 02 August 2008 00:06:23 David García Garzón va escriure:
>>>> Back to the list.
>>>>
>>>> We'll take it step by step.
>>>>
>>>> First clearance:
>>>> - Do not use toStdString to get file names. Use toLocal8Bit().constData()
>>>> in order to support current locale. toStdString uses Latin1 despite the
>>>> current one. :-(
>>>> - Remove the nameProject parameter unless you are using it for anything.
>>>> If
>>>> you want to provide a song as parameter, rename it and don't forget to use
>>>> the fromLocal8Bit.
>>>>
>>>> Then the actual forward steps. As you have the widgets that make more
>>>> noise
>>>> than any other thing if you want the analysis, let's forget about the
>>>> analysis and lets concetrate first on the widgets.
>>>>
>>>> The first phase is having a FloatArrayDataSource that allows to travel on
>>>> an extracted pool of dummy data.
>>>>
>>>> First lets create and fill the dummy data on loading the file.
>>>> * Create an array of floats of nFrames*12 slots. By now let's take the hop
>>>> size from a constant and the lenght from the audio size.
>>>> * Fill the array with a 12 bits binary time code 0, 1, 10, 11, 100, ...
>>>> loop
>>>>
>>>> Then we should create a view for such data.
>>>> * Substitute the KeySpace with a VectorView, changing the port to PCP
>>>> which
>>>> is simpler to debug than ChordCorrelation port (12 bins vs. a varying
>>>> number of chords depending on the configuration).
>>>> * Copy annotator's PoolFloatArrayDataSource.
>>>>
>>>> Instead of relying on the pools and schemas we want to provide the dummy
>>>> parameters by hand, so:
>>>> * Comment out the setDataSource and the UpdateData notice that they use
>>>> the
>>>> Schema (structure) and the DataPool (actual data) to fill some members.
>>>> * Provide a setDataSource with nBins, binGap, firstBinOffset and binLabels
>>>> as parameters  so you can do direct mapping. (those bins are bins in a
>>>> frame, pitches, so binGap=firstBinOffset=0 and binLabels are
>>>> G,G#,A,A#,B...
>>>> * Provide an UpdateData with a sampling rate, a frame division, and the
>>>> array of data that you will copy into _data
>>>> * Create a PFADS on the Turnarround
>>>> * Set the PFADS as the VectorView data source
>>>> * Connect the progress control to a Turnaround slot that calls
>>>> PFADS::updateTime with the appropiate parameter.
>>>> * Try to use a Tonnetz instead of a VectorView to check the labels
>>>>
>>>> At this point we'll have the widgets visualizing offline dummy data, so
>>>> you
>>>> can remove the TonalAnalysis and monitors from the real-time network. Then
>>>> start building an offline network that fills the offline structures, our
>>>> widgets know how to display.
>>>>
>>>> El Friday 01 August 2008 21:17:33 Pawel Bartkiewicz va escriure:
>>>> > Yes, I was reading mail and working on Turnaround from Monday, but I
>>>> > still can't make the offline analysis working, so I haven't sent any
>>>> > new patches.
>>>> >
>>>> > I forgot to commit that old patch, sorry. I've just done it but I had
>>>> > to revert and clean up the new code because it wasn't working.
>>>> >
>>>> > I'm afraid I'll have to write some hack or simply copy the code from
>>>> > Annotator's ChordExtractor, because I'm stuck and otherwise I may not
>>>> > finish the project on time.
>>>> >
>>>> > On 01/08/2008, David García Garzón <dgarcia at iua.upf.edu> wrote:
>>>
>>>
>>>
>>
>> _______________________________________________
>> Clam-devel mailing list
>> Clam-devel at llistes.projectes.lafarga.org
>> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/clam-devel
>>
>>
>