[Clam-devel] Sliders: possible bug?

[David García Garzón]

Yes we noticed yesterday that it was not working properly. This case analysis 
you did nearly spots the place where to fix it. Events from the spinbox are 
not passing by the range mapping function as the slider ones go. Thanks for 
the report. I will try to fix that as soon as possible.

David.

On Thursday 09 October 2008, Giulio Cengarle wrote:
> Hello,
>
> I was testing some clam networks and found some odd behavior of the
> sliders:
>
> - the arrow increment/decrement always passes an actual
> increment/decrement of 1, although the slider displays the increment set
> by the user (or by default) in the configuration panel.
> Example: controller set to 0 and step is set to 3.6, if you press the
> up-arrow controller jumps to 3.6 but outputs value 1.
>
> - writing a number in the slider doesn't actually set the value intended
> by the user, but rather gives an increment equal to the number divided
> by the step value. Example: step is set to 3.6, if you write 72 it
> outputs a value of 20.
>
> So currently the sliders are working correctly only when the lower bound
> is set to zero and the step is set to one.
>
> Cheers,
> Giulio
>
>
> _______________________________________________
> Clam-devel mailing list
> Clam-devel at llistes.projectes.lafarga.org
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/clam-devel


-- 
David García Garzón
(Work) dgarcia at iua dot upf anotherdot es
http://www.iua.upf.edu/~dgarcia