[Clam-devel] Re: Turnaround

Pawel Bartkiewicz tuuresairon at gmail.com
Sat Aug 9 15:09:21 PDT 2008


Hi,

We made some progress in developing Turnaround with David on Friday
and you can see two new screenshots on the wiki.

Today I tried to add support for PolarChromaPeaks but it doesn't work
as expected (the dial is always on G and it doesn't move). I haven't
managed to fix it so I'm attaching the patch if anyone is interested.
I'll try again in the morning.

Pawel


On 08/08/2008, David García Garzón <dgarcia at iua.upf.edu> wrote:
> I must say i am the guilty one. I just syncronized the qt4.py tool to qt.py
> original tool in the current version for SCons in ubuntu hardy, so i
> introduced some SCons modernities in the script. Sorry for the problems this
> could have caused you.
>
> On Divendres 08 Agost 2008, Pawel Bartkiewicz wrote:
>> Hi,
>>
>> Yes, after installing scons 0.98.5 the problem was gone. I haven't
>> tried any other versions (except 0.97), 0.98.5 was the newest in
>> Gentoo portage so I tried it first.
>> Maybe there should be some warning or scons version check?
>>
>> Pawel
>>
>> On 07/08/2008, Han, Yushen <yushen.han at gmail.com> wrote:
>> > Hi, David and Pawel
>> >
>> > I have the "no attribute 'AddMethod' " problem when I am compiling NE.
>> > All the .py files listed below did exist in the right dir. But I don't
>> > understand
>> > "AttributeError: SConsEnvironment instance has no attribute
>> > 'AddMethod':"
>> >
>> > Pawel, did you say that the problem was gone after you " had to update
>> > scons 0.97 to 0.98.5 "?
>> >
>> > I am still using 0.97 and am going to update it first...
>> >
>> > Best regards,
>> > Han, Yushen
>> >
>> > 156-56-219-141:NetworkEditor yushen$ sudo scons install
>> > prefix=/usr/local clam_prefix=/usr/local QTDIR=/opt/local
>> > scons: Reading SConscript files ...
>> >
>> > scons: warning: QTDIR variable is not defined, using moc executable as
>> > a hint (QTDIR=/opt/local)
>> > File "/usr/local/share/clam/sconstools/qt4.py", line 208, in _detect
>> > AttributeError: SConsEnvironment instance has no attribute 'AddMethod':
>> >   File "/Users/yushen/CLAM/clam/NetworkEditor/SConstruct", line 44:
>> >     env.Tool('qt4', toolpath=[clam_sconstoolspath])
>> >   File "/opt/local/lib/scons-0.97/SCons/Environment.py", line 1340:
>> >     tool(self)
>> >   File "/opt/local/lib/scons-0.97/SCons/Tool/__init__.py", line 157:
>> >     apply(self.generate, ( env, ) + args, kw)
>> >   File "/usr/local/share/clam/sconstools/qt4.py", line 390:
>> >     env.AddMethod(enable_modules, "EnableQt4Modules")
>> >
>> >
>> > On Tue, Aug 5, 2008 at 8:23 AM, Pawel Bartkiewicz
>> > <tuuresairon at gmail.com>
>> >
>> > wrote:
>> >> Ok, it took me some time to understand, but here's a patch. I'm not
>> >> committing it, because it's not complete yet. It replaces the realtime
>> >> analysis with a VectorView displaying the time code. I had to change
>> >> AudioFileMemoryLoader a bit.
>> >>
>> >> BTW, I had to update scons 0.97 to 0.98.5 (masked as unstable in
>> >> Gentoo) because one of the recent commits added the following error in
>> >> sconstools/qt4.py when building Turnaround:
>> >> "SConsEnvironment instance has no attribute 'AddMethod'"
>> >>
>> >> On 02/08/2008, David García Garzón <dgarcia at iua.upf.edu> wrote:
>> >>> Pawel, I did some changes on the PoolDataArraysource in order to easy
>> >>> your
>> >>> task, so update your repository before going on.
>> >>>
>> >>> El Saturday 02 August 2008 00:06:23 David García Garzón va escriure:
>> >>>> Back to the list.
>> >>>>
>> >>>> We'll take it step by step.
>> >>>>
>> >>>> First clearance:
>> >>>> - Do not use toStdString to get file names. Use
>> >>>> toLocal8Bit().constData()
>> >>>> in order to support current locale. toStdString uses Latin1 despite
>> >>>> the current one. :-(
>> >>>> - Remove the nameProject parameter unless you are using it for
>> >>>> anything. If
>> >>>> you want to provide a song as parameter, rename it and don't forget
>> >>>> to
>> >>>> use
>> >>>> the fromLocal8Bit.
>> >>>>
>> >>>> Then the actual forward steps. As you have the widgets that make more
>> >>>> noise
>> >>>> than any other thing if you want the analysis, let's forget about the
>> >>>> analysis and lets concetrate first on the widgets.
>> >>>>
>> >>>> The first phase is having a FloatArrayDataSource that allows to
>> >>>> travel
>> >>>> on
>> >>>> an extracted pool of dummy data.
>> >>>>
>> >>>> First lets create and fill the dummy data on loading the file.
>> >>>> * Create an array of floats of nFrames*12 slots. By now let's take
>> >>>> the
>> >>>> hop
>> >>>> size from a constant and the lenght from the audio size.
>> >>>> * Fill the array with a 12 bits binary time code 0, 1, 10, 11, 100,
>> >>>> ... loop
>> >>>>
>> >>>> Then we should create a view for such data.
>> >>>> * Substitute the KeySpace with a VectorView, changing the port to PCP
>> >>>> which
>> >>>> is simpler to debug than ChordCorrelation port (12 bins vs. a varying
>> >>>> number of chords depending on the configuration).
>> >>>> * Copy annotator's PoolFloatArrayDataSource.
>> >>>>
>> >>>> Instead of relying on the pools and schemas we want to provide the
>> >>>> dummy parameters by hand, so:
>> >>>> * Comment out the setDataSource and the UpdateData notice that they
>> >>>> use the
>> >>>> Schema (structure) and the DataPool (actual data) to fill some
>> >>>> members. * Provide a setDataSource with nBins, binGap, firstBinOffset
>> >>>> and binLabels
>> >>>> as parameters  so you can do direct mapping. (those bins are bins in
>> >>>> a
>> >>>> frame, pitches, so binGap=firstBinOffset=0 and binLabels are
>> >>>> G,G#,A,A#,B...
>> >>>> * Provide an UpdateData with a sampling rate, a frame division, and
>> >>>> the array of data that you will copy into _data
>> >>>> * Create a PFADS on the Turnarround
>> >>>> * Set the PFADS as the VectorView data source
>> >>>> * Connect the progress control to a Turnaround slot that calls
>> >>>> PFADS::updateTime with the appropiate parameter.
>> >>>> * Try to use a Tonnetz instead of a VectorView to check the labels
>> >>>>
>> >>>> At this point we'll have the widgets visualizing offline dummy data,
>> >>>> so you
>> >>>> can remove the TonalAnalysis and monitors from the real-time network.
>> >>>> Then
>> >>>> start building an offline network that fills the offline structures,
>> >>>> our widgets know how to display.
>> >>>>
>> >>>> El Friday 01 August 2008 21:17:33 Pawel Bartkiewicz va escriure:
>> >>>> > Yes, I was reading mail and working on Turnaround from Monday, but
>> >>>> > I
>> >>>> > still can't make the offline analysis working, so I haven't sent
>> >>>> > any
>> >>>> > new patches.
>> >>>> >
>> >>>> > I forgot to commit that old patch, sorry. I've just done it but I
>> >>>> > had to revert and clean up the new code because it wasn't working.
>> >>>> >
>> >>>> > I'm afraid I'll have to write some hack or simply copy the code
>> >>>> > from
>> >>>> > Annotator's ChordExtractor, because I'm stuck and otherwise I may
>> >>>> > not finish the project on time.
>> >>>> >
>> >>>> > On 01/08/2008, David García Garzón <dgarcia at iua.upf.edu> wrote:
>> >>
>> >> _______________________________________________
>> >> Clam-devel mailing list
>> >> Clam-devel at llistes.projectes.lafarga.org
>> >> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/clam-deve
>> >>l
>> >
>> > _______________________________________________
>> > Clam-devel mailing list
>> > Clam-devel at llistes.projectes.lafarga.org
>> > https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/clam-devel
>
>
>
> --
> David García Garzón
> (Work) dgarcia at iua dot upf anotherdot es
> http://www.iua.upf.edu/~dgarcia
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Turnaround-ChromaPeaks.patch
Type: text/x-diff
Size: 18857 bytes
Desc: not available
URL: <http://lists.clam-project.org/pipermail/clam-devel-clam-project.org/attachments/20080810/8d43053c/attachment-0005.patch>


More information about the clam-devel mailing list